- Analysis & Instrumentation
- Cleaning, Polishing & Grinding
- Coating & Surface Treatment
- Controlled & Modified Atmospheres
- Freezing & Cooling
- Fumigation & Pest Control
- Inerting, purging, sparging
- Melting & Heating
- Petrochemical Processing & Refining
- Pharma & Biotechnology
- Plastic Molding, Foaming, Forming & Extrusion
- Process Chemistry
- Rubber Deflashing & Vulcanization
- Thermal Cutting
- Water & Soil Treatment
In the production of polymer foams, liquid carbon dioxide is used as a blowing agent instead of environmentally hazardous substances. Carbon dioxide is a physical blowing agent with properties desired for ideal foaming, while simultaneously fulfilling many requirements related to quality, efficiency and ecology.
The technology uses far less blowing agent than existing alternatives and the product retains its properties for a longer period. Successful use of CO2 blowing agent technology in manufacturing of polymer foams depends on several key parameters, of which the most important is to supply CO2 to the process in liquid form and at a desired pressure. At the same time, the fluctuation in carbon dioxide flow should be minimized.
Inert Gas Metering Device DSD 500
In physical foaming of polymers, i.e. extrusion, injection molding or Polyurethane foaming, the use of inert gases such as carbon dioxide (CO2) or nitrogen (N2) as blowing agents is constantly on the rise. The reason is that inert gases are an efficient, inexpensive alternative to conventional foaming agents because of their high foaming capacity and low consumption. Moreover, inert gases are eco-friendly, non-toxic, and non-flammable, meeting strict environmental laws.
The patented Linde DSD 500 was especially designed to meter liquid CO2, but can also be used for gaseous nitrogen. It consists mainly of one or two high-performance compressors especially adapted to the use of CO2, a suitable mass-flow meter, and a special control valve (3/3-way proportional). The DSD 500 is easy to install, without having to pre-cool the CO2, and allows an extremely accurate gas flow control: independent of pressure, temperature or type of gas. It is suitable for continuous as well as discontinuous operation.
Liquid CO2 Pump Systems
Choose from our wide range of efficient, low-pressure pumping systems for liquid CO2 in your foaming processes.
The systems with up to 1150 psi can be used to supply any kind of metering pumps with bubble-free liquid CO2. The CO2 pressure can be regulated according to your demand.